Quantar Technology
Mepsicron-II tm Series Single-Photon Imaging Detector System
MODEL 2601B TECHNICAL DESCRIPTION, OCT 2001
Key Features
- Ultimate, true single-photon-counting for superb ultra-low light sensitivity with high signal-to-noise. Exhibits far lower detector noise than CCD cameras.
- Spectral range from below 180 nm to above 900 nm.
- Exceptionally low detector dark count, typically less than 10-5 counts/pixel/sec in 2-D mode at -25 deg C. No CCD- type readout noise.
- Large 23 mm circular active area enables maximum light collection from experiments.
- High spatial resolution, typically better than 55 microns FWHM across full 23 mm active area.
- Virtually unlimited time-integrated dynamic counting range with digital counting avoids pixel count saturation. No on-chip signal storage is required.
- Remarkable 100 psec FWHM single-photon time-resolution available (optional subsystem) combined with single-photon imaging for time-resolved spectroscopy and mapping.
- Real-time XY photon display, low cosmic- ray sensitivity, simple operation, user-friendly.
- Complete, integrated and factory-tested detector system with optional PC-based data collection and display systems. Reliable operation and dependable support.
| System Performance Advantages |
| |
| Home | Products | Quantar Products | FAST Products | Support/Service | Contact Us |
|
Quantar Technology Incorporated - 2620A Mission Street, Santa Cruz, CA 95060-5703 Tel: 831-429-5227 · FAX: 831-429-5131 · www.quantar.com |